Walkie Low Lift Pallet Truck EWP-30, CE/GS

1 The perfect upgrade from a manual pallet truck, for light duty applications.

Walkie Low Lift Pallet Truck EWP-30, CE/GS

 

1. Tight but friendly components layout, easy access to maintenance.

2. Minmum 75mm fork lowest height suit to narrow access pallets.

3. Compact chassis design improves manoeuvrability in confined spaces.

4. Creep speed control enable the operator to work more effectively in confined spaces.

5. Battery tray with reinforced protection against collision and vibration.

6. Balance caster wheel for added stability and maximum safety.

 

OPERATION / CONTROLS

Thumb throttle, lift, lower, horn and reversing switch are easily located on the ergonomically correct bottom mount handle.On/Off key switch, power disconnect and hour meter/battery discharge indicator mounted on dash.Braking activation at top and bottom of handle working range.Automatic neutral braking on throttle release.Low effort steering.

DRIVE SYSTEM

High performance vertically mounted Curtis SepEx™separately excited motor provides maximum torque throughout entire travel speed.Precision helical drive gears provide quiet operation and transfer power more efficiently from drive motor to axle.No directional contactors therefore less maintenance. Single line contactor operates with an integrated power disconnect switch.Easy access cover exposes electrical and major mechanical components for inspection and maintenance.Long life drum brake system mounted on motor armature shaft intensifying the braking power through the double reduction transmission.

HYDRAULIC SYSTEM

Lifting rams are hard chromed plated for long life and mounted for even load lifting.Pump unit, motor and solenoid actuated, pressure compensated lowering valve are easily accessible. FORKS/CHASSIS 48” long forks, 27” fork width O.D.

ELECTRICAL SYSTEM

24 volt system.State-of-the-art programmable Curtis transistor controller motor provides smooth and seamless control.Auto reset circuit breaker and fused control circuit designed to protect the electrical system.

WHEELS

Tapered roller bearings (drive wheel) operating in oil sealed case.Greasable sealed (load wheels) ball bearings.Two extra heavy-duty (transmission), tapered roller bearings.Self-lubricating (fork linkage), heat treated roller bearings.

Model				EWP-30
Characteristics	Capacity		kg	1300
	Load centre		mm	600
	Operator type			Walkie
Dimensions	Lifting height		mm	120
	Groundclearnce+fork thickness		mm	74/85
	Raised height		mm	194/205
	Standard fork width		mm	540/685
	Fork length		mm	1150	1200
	Fork thickness		mm	44
	Fork width		mm	160
	Overall length		mm	1570	1620
	Rear height			685
	Rear length		mm	420
	Overall width		mm	750
	Minimum turning radius		mm	1380	1420
	Minimum aisle width		mm	1770	1820
	(1000*1200mm)
Performance	Maximum travel speed	Laden	km/h	4.6
		Unladen	km/h	5.9
	Maximum lifting speed	Laden	m/s	0.056
		Unladen	m/s	0.06
	Maximum lowering speed	Laden	m/s	0.057
		Unladen	m/s	0.059
	Gradeability	Laden	%	5
		Unladen	%	7
Weight	Service weight without battery		kg	244
	Service weight with battery		kg	292
	Wheel(drive/load)

 

Walkie Low Lift Pallet Truck